PA Towers can be hired out with any of our stages and we can offer a number of different options depending on your event or show requirements.

We offer discounted rates for tower hire when provided with a stage or sound system.

Flying PA Towers

For flying line array PA systems freestanding

The Litec QX30 truss tower will support a load of 500Kg at a maximum height of 7.5m or the D30 tower can support a 600kg load at 9.5m. The load is lifted using a Lodestar chain motor which is included with the tower.

Both towers are suitable for indoor or outdoor use with a maximum wind speed of 40mph. The towers are supplied with an anemometer so the exact wind speed can be determined.

Nova PA Flying Tower

The Nova PA flying tower can be 7mtrs or 10mtrs tall with a capacity of 1000kg per tower.

On grass sites the towers are anchored to the ground using corkscrew style anchors, where this is not possible suitable ballast can be used.

We provide riggers to install the towers and don’t dry hire them out.

We do offer discounted rates for tower hire when provided with a stage or sound system.

Conventional PA Towers

PA system scaffold towers can be constructed to various heights with a number of floors onto which speakers can be stacked.

Branding scrims can be attached to the front of PA towers and/or the sides.

Raised Platforms for PA Systems

We can construct uncovered platforms in a number of sizes from 8ft x 4ft to various heights and can take a minimum weight of 500kg/sqm. These can be adjoined to the stage or freestanding.

Please contact SoundStage One to discuss how we can help and order your free quotation.
Get A Quote